No pressure...

reeferkeeper420

Distinguished Member
Joined
May 15, 2013
Location
Ingersoll, Ontario
Im setting up thsi RODI unit i bought, its 75 GPD and is in my basement going up about 20' to my room and i have no pressure after about 10 seconds, and the waste is still pouring out. Then after i turn my valve off up stairs it takes forever for the di to fill up and waste is still comin out, like way to much . Not sure if somethings hooked up wrong.
 

KBennett

Member
Joined
Sep 17, 2012
Location
Brantford
Try filling a bucket below the unit to see if it improves.  20ft oh head is probably decreasing the differential across the filter to less than you want.
 

Pistol

Super Active Member
Donor
Joined
Aug 16, 2012
Location
Corunna
Not a head pressure problem, do you have the restrictor in the correct tube, it goes in the waste water tube
 

Pistol

Super Active Member
Donor
Joined
Aug 16, 2012
Location
Corunna
The white elbow beside the blue elbow on the membrane is the waste line, the elbow could be the restrictor or it is in the tube.
 

reeferkeeper420

Distinguished Member
Joined
May 15, 2013
Location
Ingersoll, Ontario
So where the blue tube is coming out of is waste on the white elbow? Causebthats what i have as the waste line. But i have not even a gallon of good to probably 5gallons+ of bad.
 

Pistol

Super Active Member
Donor
Joined
Aug 16, 2012
Location
Corunna
In the first pic, the blue line going down with the white valve, is that the waste line? if so that valve might be the restrictor.
 

Pistol

Super Active Member
Donor
Joined
Aug 16, 2012
Location
Corunna
close the valve, it might be a flush valve, closed might be the restrictor
 
Top