Apex What's The Scoop?
- Thread starter Nonuser
- Start date
Most used ones will need the probes replaced. At that point you will probably paid more then new. Plus new comes with warranty. I am all for used equipment, but my Apex is/was new.
Sent from my SM-G925W8 using Tapatalk
That's what I was thinking, But If anyone wanted to donate a used one to me for the cause then....
EricTMah
Aquariums by Design
If you're not in a hurry to get one. Sit on it until the nice weather Hits. I bet there will be some good deals to be had. And I'm not just talking about an Apex.
Sony Xperia Z3
Sony Xperia Z3
Jay Turner
New Member
- Joined
- Jan 6, 2016
- Location
- Newmarket
Unfortunately I've always found the apex stuff goes on sale Black Friday.
I agree with Torx. I'd buy it new. It's a pretty expense item if anything goes wrong with a used unit.
Sent from my iPad using Tapatalk
I agree with Torx. I'd buy it new. It's a pretty expense item if anything goes wrong with a used unit.
Sent from my iPad using Tapatalk
$140 for a breakout box seems pretty steep, better double check that.
True. I missed that point. They are only $40-60 or so
Sent from my SM-G925W8 using Tapatalk
Well I am new to the saltwater side. But have been in the freshwater side for close to 30 years. I agree with you that one of these could save hundreds if not a $1,000 if something went south.
Bece13
Member
- Joined
- Nov 21, 2014
- Location
- Kitchener, Ontario
If you understand computers a bit you can look at ReefAngel controller. Lots of support on www.reefangel.com. I'm using it for few years now and pretty happy.
More expensive once you buy all the components?
Not if you grab it off Marine depot right now. You get the equivalent to an Apex Classic for 369USD right now. HERE
Plus there is a nice set up in the for sale section right now. Not sure if it sold or not yet. http://thefragtank.ca/community/threads/reefkeeper-lite.20226/
EricTMah
Aquariums by Design
Go with the Apex. You won't be disappointed.
Easier to set up and use away from your home network with fusion now.
Just my opinion
Sony Xperia Z3
Bece13
Member
- Joined
- Nov 21, 2014
- Location
- Kitchener, Ontario
@TORX, I was talking about ReefAngel not ReefKeeper.
@Nonuser - For USD289 you get the basic setup: Controller, Relay Box (8 controllable outlets), pH probe, Temp probe, 2 float switches (ATO), cables, etc. I would recommend adding the wifi module (USD129) for control over the internet (from smartphones, tablets, computers). From here you can add anything you want based on your needs. Support is excellent on there forum. The system is based on Arduino, the source code is open source so you have the option of changing the code as you wish. The sky is the limit. You can easily replace the parts in case you have a problem. (only USD75 for controller board - happened to me after the controller took a bath:-()
I'm not sure how to put it... if you want full control, like to customize it, understand programming, are DIY and enjoy tinkering with your toys, then this is excellent and can make it way more powerful than any out of the box system. Otherwise I would go with Apex or ReefKeeper. It's like DIY LED Lights (if you know what you are doing) or buying out of box LED Lights and be stuck with their limited configuration. Or, for example, you BBQ a steak the way you wanted it or go to a good restaurant and always get the same few good choices. I hope the summer is coming soon.
I'm not pushing ReefAngel and I agree that Apex is excellent. It was actually my first choice originally.
Anyway, any controller is better than none.
@Nonuser - For USD289 you get the basic setup: Controller, Relay Box (8 controllable outlets), pH probe, Temp probe, 2 float switches (ATO), cables, etc. I would recommend adding the wifi module (USD129) for control over the internet (from smartphones, tablets, computers). From here you can add anything you want based on your needs. Support is excellent on there forum. The system is based on Arduino, the source code is open source so you have the option of changing the code as you wish. The sky is the limit. You can easily replace the parts in case you have a problem. (only USD75 for controller board - happened to me after the controller took a bath:-()
I'm not sure how to put it... if you want full control, like to customize it, understand programming, are DIY and enjoy tinkering with your toys, then this is excellent and can make it way more powerful than any out of the box system. Otherwise I would go with Apex or ReefKeeper. It's like DIY LED Lights (if you know what you are doing
) or buying out of box LED Lights and be stuck with their limited configuration. Or, for example, you BBQ a steak the way you wanted it or go to a good restaurant and always get the same few good choices. I hope the summer is coming soon. I'm not pushing ReefAngel and I agree that Apex is excellent. It was actually my first choice originally.
Anyway, any controller is better than none.
Just to confuse you more I would look into the profilux
If you want to be sure any add ons or modules will stay compatible with your controller then Profilux is the one.
- reliable
- easy to program (no coding)
- new equipment is compatible with older models
- limitless possibilities
Profilux is the original, every thing else is just a knock off.
If you can come to Hamilton I can give you an easy walk through on the basics and show you just how easy this controller is.
Profilux mini is a good option you can find it here
http://bigshowfrags.com/profilux-mini/
I know several people that after going to macna 2016 have sold off there apex completely and switched to the Profilux
My Profilux was doing what the apex does 5 years before the apex was even heard of, this controller is number 1 outside North America. (And that is only due to marketing)
If you want to be sure any add ons or modules will stay compatible with your controller then Profilux is the one.
- reliable
- easy to program (no coding)
- new equipment is compatible with older models
- limitless possibilities
Profilux is the original, every thing else is just a knock off.
If you can come to Hamilton I can give you an easy walk through on the basics and show you just how easy this controller is.
Profilux mini is a good option you can find it here
http://bigshowfrags.com/profilux-mini/
I know several people that after going to macna 2016 have sold off there apex completely and switched to the Profilux
My Profilux was doing what the apex does 5 years before the apex was even heard of, this controller is number 1 outside North America. (And that is only due to marketing)