Do You Guys Know Where I Can Find ..

Luke.

Distinguished Member
Joined
Jun 9, 2015
Location
Kitchener
A Sicce SE-200 (357 gph) that’s in Canada ? Or any guys on here with stores can get one ? I’d like to know how much they go for it’s a replacement for my skimmer
 

Winks

Active Member
Website Affiliate
Joined
Nov 26, 2016
Location
London
You can try getting a hold of Ian @reefdiver from Sustainable Maine Canada. I believe that is the same pump that goes into the
ESHOPPS PSK-100H HOB SKIMMER which he sells at his store. I think that if he sells the skimmer then he should be able to get parts for it which means he should be able to get that pump for you.
 

Luke.

Distinguished Member
Joined
Jun 9, 2015
Location
Kitchener
You can try getting a hold of Ian @reefdiver from Sustainable Maine Canada. I believe that is the same pump that goes into the
ESHOPPS PSK-100H HOB SKIMMER which he sells at his store. I think that if he sells the skimmer then he should be able to get parts for it which means he should be able to get that pump for you.


I took the thing apart and put it back together and it seems to be working now ? Weird how all of a sudden nothing then it’s fine I’ll have to keep an eye on it for now
 

TORX

Administrator
Staff member
Website Admin
Joined
Nov 27, 2010
Location
Blenheim, Ontario
Website
www.thefragtank.ca
I took the thing apart and put it back together and it seems to be working now ? Weird how all of a sudden nothing then it’s fine I’ll have to keep an eye on it for now

Next time you have a chance, take a good look at the magnet and the inside of the housing. Check for any swelling, cracks or damage. It could have just been something jammed in there enough to stop it from spinning, but you will want to watch for other things as well.
 

MrHermit85

Active Member
Joined
Mar 19, 2013
Location
London, Ontario
as torx said, check the impeller before buying an entire new pump. Your other post said the pump was really hot. Pumps sometimes have a fail safe so if it was not spinning it could have just cut off. Having said that I had a skimmer pump which would not switch on after power loss unless I cleaned it and everything looked good. Pretty bizarre.
 
Top