Heywooood
New Member
- Joined
- Dec 10, 2014
- Location
- London, Ontario
I'm finally looking at getting my own RODI system. Source feed is a well, pressure tank is set to 40/60psi. The system I'm looking at from Aquasafecanada recommends a minimum of 50PSI, and they sell a 100 PSI booster if you can't maintain that minimum. Anyone else using a similar setup without a booster? I would also need a pressure tank for it, which starts to add up pretty quickly.
Alternatively, can I just set my existing pressure tank to 50/70 instead? I think you just have to change the cutoff and on switches and add air pressure to the tank to bring it 2 PSI below cutoff, but I'm not sure if that's risky.
Thanks.
Alternatively, can I just set my existing pressure tank to 50/70 instead? I think you just have to change the cutoff and on switches and add air pressure to the tank to bring it 2 PSI below cutoff, but I'm not sure if that's risky.
Thanks.